Setup Wizard - AirLive WLA-9000AP Guia De Inicio Rapido

Setup Wizard

There are 3 feature in the Setup Wizard :
Time Setting
Device IP Setting
Operational Mode
Time Settings allows to set NTP or to use the time setting of connected
computer.
Please change IP by selecting the IP under the tab page of "Device IP
Settings"
To change operational mode, please go to Setup Wizard and click on
"Operational Mode", select desired operation mode and click on "APPLY" to
validate.
After reboot, the device changes its operation mode as selected
configuration, the parameter display changes according to Operational
Mode.
Each wireless interface of any operational mode can be configured
separately. In following sections, each mode is presented under a single
interface, which is applicable for all operational modes.
802.11 a/b/g
Dual Radio Access Point
WLA-9000AP
English
6
6