Measurements Menu - Fracarro KDF Instrucciones De Funcionamiento

Enter the OUTPUT menu with the
dard remodulation.
Set output f requency
OUTPUT
Video Format
setting
RF lev el
adjustment
Enable/disable the
v ideo test
Audio Output
adjustment
Audio lev el
adjustment
Notes about the video format : if the TV set is equipped with an auto fit-to-screen function of the video
format through the WSS signal, we recommend choosing the "adapted 16:9" format for 16:9 TV sets and
"Letterbox" for 4:3 TV sets. If your TV set has a different video format, we recommend setting "Pan scan"
and "combined" formats properly.
Enter the MEASUREMENTS menu with the
to the selected transponder in the INPUT menu. The values that are referred there are just an indication.
MEASURES
BER of the input signal
S/N of the input signal
5.6 OUTPUT MENU
arrow key or with the
OUTPUT FREQ. SEL. BY FREQ.
SEL. BY CHANNEL
VIDEO FORMAT Letter Box
RF LEVEL
MANUAL
VIDEO TEST OFF
AUDIO TYPE OUT MONO
AUDIO LEVEL 0
Confirm the settings by pressing the
S key after the modules programmation.

5.7 MEASUREMENTS MENU

arrow key or with the
Module sof tware v ersion
SOFTWARE REL.
BER
S/N (dB)
key of the TPE to set the parameters relevant to the stan-
STANDARD
FREQUENCY (MHz)
Increase/decrease of 0.25MHz by TPE arrows or enter
the v alue directly by the digit key board.
COUNTRY
OUTPUT CHANNEL
LETTER-BOX
PAN and SCAN
16/9
COMBINED
ADAPTED-16:9
In read-only mode, regulation by trimmer
OFF
B&W BLACK
B&W
MONO
MONO LANG 2
MONO LANG 1
MONO LANG 2
0, 1, ..., 10
10
key; save the settings by pressing the
key on the TPE to display the parameters relevant
KDF v .1
1E-5
12
15
PAL-BG
PAL-I
PAL-DK
PAL-N
PAL-BG PAL-M
PAL-H
SECAM-L
NTSC-M
PAL-M
172 445
470 860
EUROPE
FRANCE
UK FRANCE
UK
AUSTRALIA
E5-E12
E5 E69
S11-S38
E21-E69
1= undetected signal
0= undetected signal