D.A.S. DSP-48 Manual Del Usuario página 22

OPERATION
4.2 Loading Program
LOAD PROGRAM: 1
4X2-WAYCrossover
LOADING PROGRAM
4X2-WAYCrossover
4.3 Storing program
It may store all parameters of input gain, input delay , input EQ, output gain, output delay,
output EQ, output limit and output phase into the program, convenient for the unit to debug.
The maximum characters of program name is 20.
It can store 30 programs at most.
STORE PROGRAM:1
4*2WAYCROSSOVER
STORING PROGRAM
4*2WAYCROSSOVER
21
Program
Load a program
Press SAVE/ENTER key to enter the operation of load a program
Rotate PARAMETER to change program name, press SAVE/ENTER key to load program
Program
Store a program
Press SAVE/ENTER key to enter this sub-menu of store a program.
Press SAVE/ENTER key to operate storing program.
When the colon flash, rotate PARAMETER to choose program
name press PREV and NEXT key to change the position of
characters, rotate PARAMETER to choose the letter.