11.1 - MAINTENANCE AND
CLEANING
WARNING:
For information and warnings regarding
maintenance or cleaning, follow the in-
formation given in the "General warnings
during maintenance" in chapter 1 in this
manual.
OPERATIONS TO PER-
FORM DAILY
11.1.a - Emptying and cleaning the
clean water tank (Fig. 24)
WARNING:
Once all of the cleaning operations have
been completed, it is necessary to rinse
the clean water tank out in order to pre-
vent deposits or encrustations.
After draining the recovery water tank, drain
the clean water tank as follows:
-
Position the machine over a drain outlet.
-
Remove the water intake tube (1) from
the tank.
-
Insert the upper part of the tube (1) into
the drain connector (2) beneath the tank
(3).
-
Open the tap (4) and let the water con-
tained in the tank drain out completely.
-
Leave the drainage tap open and wash
out the inside of the tank, pouring in clean
water from the upper opening.
-
Once the cleaning operation has been
completed, close the tap (4) and recon-
nect the tube (2) to its proper lodging.
4
EN - 25
EN
1
3
1
2
1
Fig. 24