Wren V5BT14 Guía De Preparación página 9

Select V5BT14_xxxxxx. If
your source device asks for a
passkey, enter "0000" (four
zeros) and press "OK." The
Bluetooth indicator on the
V5BT will blink amber two
times per second when pairing
is in progress
(Figure 3)
A message will appear on
your source device to indicate
when pairing is complete,
In addition, the Bluetooth
indicator on the V5BT will go
from blinking amber to solid
blue . You are now
(Figure 4)
ready to play music wirelessly
on your V5BT.
Problem connecting? Visit wrensound.com/support for additional help.
.
Figure 3 • Pairing
To play music on your
Wren V5BT, make sure that
Bluetooth is turned on and
the V5BT14 has been selected
on your source device. Then
simply select your favorite
music on your device and play.
blinking
amber
Figure 4 • Connected
solid
blue
9