Declaration Of Conformity; Important - MIRKA PBS 10NV Manual De Instrucciones

Declaration of conformity

Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the products Mirka® PBS 10NV & PBS 13NV Pneumatic Belt Sander
(See "Technical data" table for particular model) to which this declaration relates are in conformity with the following
standards or other normative documents: EN ISO 12100:2010, EN ISO 11148-8:2011, EN ISO 15744:2002,
EN ISO 20643:2208 in accordance with the regulations 2006/42/EC .
Jeppo 29.09.2020
Place and date of issue
Operating instructions include: Exploded view, Parts
list, Declaration of conformity, Important, Required
personal safety equipment, Please read and comply with,
Warning, Caution, Additional safety warnings, Technical
data, Proper use of tool, Work stations, Operating
instructions, Maintenance, Replacing the belt, Further
service, Troubleshooting guide .
Original instructions . We reserve the right to make changes to this manual without prior notice .

Important

Read these safety and operating instructions carefully before installing, operating or maintaining this tool . Keep these
instructions in a safe, accessible location .
Required personal safety equipment
Read
operator's manual
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage .
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property
damage .
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from:
Superintendent of Documents, Government Printing Office, Washington DC 20402
• Safety Code for Portable Air Tools, ANSI B186 .1 available from:
American National Standards Institute, Inc ., 1430 Broadway, New York, New York 10018
• State and local regulations
WARNING
• Always wear required personal safety protection in accordance with manufacturer's instructions and local/national
standards while using this tool .
• Do not use a power tool if you are tired or under the influence of drugs, alcohol or medication .
• Read the Materials Safety Data Sheet (MSDS) for the working surface .
• Use the tool with dust extraction . A suitable dust extraction unit will reduce hazardous dust .
Wear
safety glasses ear protection
Company
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel . +358 20 760 2111
Fax +358 20 760 2290
www .mirka .com
Wear
safety gloves
Mirka® Pneumatic Belt Sander • PBS 10NV & PBS 13NV
Stefan Sjöberg, CEO
Wear
face mask
en
Wear
43