Iii. Setup & Functions; Inserting Batteries - HMM Diagnostics SmartLab fit W Manual De Usuario

III. Setup & functions

Inserting batteries

The meter uses two alkaline 1.5V (AAA) batteries. Batteries will
normally last for over 1000 tests. Other types of 1.5V (AAA)
batteries are also acceptable, yet the capacity of test times
may differ. Install the batteries when you first use the meter or
replace with new batteries when the "LP" message and the low
battery symbol appear on the LCD display.
Note:
1. Remove the batteries when you will not be using the meter for
one month or longer.
2. Values won't be deleted when the batteries are replaced.
Meter, batteries, lancets, test strips etc. must be disposed
of according to local regulations at the end of their usage.
Low battery symbol
60