Getting To Know Your Griddle; Using Your Griddle - Bella 13602 Manual De Instrucciones

SO-308166_13602 BELLA Griddle 2 lang_Layout 1 11-08-02 4:08 PM Page 4

GETTING TO KNOW YOUR GRIDDLE

Product may vary slightly from illustration.

USING YOUR GRIDDLE

CAUTION: Because some countertop finishes are affected by heat more than others, use care
not to place griddle on surfaces where heat may cause a problem.
1. Before first use, see Cleaning Instructions and Hints For Care and Hints For Care and Use
of Non-stick surface.
2. Always place the appliance on a flat, clean and non-slippery surface before operating.
3. Always place the appliance on a heat resistant surface as the grill plate reaches high
temperatures.
4. Always leave a gap of approximately 20 cm. around the exterior of appliance.
Never use near curtains, walls, under cupboards or other flammable materials.
CAUTION: Griddle surfaces are hot during use.
5. Place drip pan into base.
6. Fill drip pan with water to make cleaning easier and help eliminate smoke.
7. Griddle may be positioned with the control at the right or left, as desired.
8. Plug the Power Cord/Temperature Controller, into the griddle first, ensuring the
temperature is set to OFF position with the control dial facing upwards. Plug the power
cord plug into a suitable wall outlet corresponding to the supply requirements of the grill
switch power ON.
NOTE: There may be a small amount of smoke and smell during the first use of the
appliance - this is normal.
Detachable Temperature Dial
Pull out drip tray
4