Commercial Electric 53826101 Manual De Uso Y Cuidado página 6

installation (continued)
6
Positioning the electrical box
□ Place the electrical box (B) through the cut-out hole
in the ceiling and position it where desired.
note: The electrical box (B) must be no more
than 16 inches from the edgelit downlight
based on the length of the connector cables.
7
Connecting the electrical box
to the LED Downlight
□ Plug the male connector from the electrical box (B) into
the female connector from the LED downlight (A).
□ Twist the two parts of the connector in opposite
directions to lock them together.
Connector
A
9
Activating the LED downlight
□ Restore power at the electrical panel.
□ Turn on the light switch to activate the fixture.
B
8
Positioning the LED downlight
□ One at a time, flip the clips on the LED downlight (A) up
and insert into the opening in the ceiling.
□ Once both clips are inside the cut-out, gently push the
LED downlight (A) upward until the trim is flush with the
ceiling surface.
note: Select the preferred color temperature of the
light before inserting the LED downlight (A) into the
ceiling opening.
A
6
B
Clip