Throttle Control - DeWalt DXCMWA5591056 Manual De Instrucciones

R
Q
F
E
G
T
SAFETY VALVE
This valve (I) is designed to prevent system failures by relieving
pressure from the system when the compressed air reaches a
predeter mined level. The valve is preset by the manu facturer and
must not be removed or modified in any way.
AIR TANK PRESSURE GAUGE
The air tank pressure gauge (D) indicates air pressure in the air tank.
REGULATED PRESSURE GAUGES
The regulated pressure gauge (E) indicates the air pressure available
at the outlet side of the regulator. This pressure is controlled by the
regulator and is always less or equal to the air tank pressure.
REGULATORS
The regulator knob (F) controls the air pressure coming from the
air tank.
Q
F
E
G
S
T
I
D
To Adjust Regulator:
1. Pull regulator knob (F) out to unlock.
2. Turn knob clockwise to increase regulated pressure and
counterclockwise to decrease regulated pressure.
3. When desired pressure is shown on the regulated pressure
gauge push knob in to lock.
WARNING: Risk of Bursting. Too much air pressure causes a
hazardous risk of bursting. Check the manufacturer's maximum
pressure rating for air tools and accessories. The regulator
outlet pressure must never exceed the maximum pressure
rating.
EXPANSION PORTS (Q)
These can be used for additional regulators for added tool
capacity. Additional regulator, gauge and quick connects sold
separately.
AIR OUTLETS (QUICK CONNECTS 1/4") (G)
A quick release for attaching and removing a 1/4" air hose.
EXTRA 1/2" PORT (R)
For connecting another H4X unit - doubling capacity and
efficiency.
QUICK CONNECT - 1/2" (S)
A quick release for attaching and removing the H4X unit.
Easily connects to a 1/2" air hose for unrestricted air from the
compressor to the H4X.
UNREGULATED PORTS (T)
For attaching an additional 1/2" quick connect or air hose.

THROTTLE CONTROL

When maxi mum air tank pres sure is reached and the unloader
11