Review Button; Clear Button; Random Button; Repeat Button - Rotel RCX-1500 Manual De Instrucciones

English
REVIEW Button (remote only)
This button is used to review the memorized tracks in Program Play mode.
Press the button and the first memorized track number and "Prog Review"
will appear in the Display. Pressing the REVIEW button again while the
track number is displayed will continue the review sequence, showing
the next memorized track. Continue pressing the REVIEW button to see
the complete memorized track list.
If the REVIEW button is not press again, after 5 seconds the review
process is terminated and the unit resumes whatever mode it was in
before you started the review process or resumes Program Play with the
current track.
You may remove a selection from the Program Play list during the review
procedure using the CLEAR button, as described below.
CLEAR Button (remote only)
This button allows you to remove a track selection from the memorized
program play list during the review procedure described above. Follow
the review procedure until the desired track number appears. Then,
instead of pressing the REVIEW button to continue, remove the track by
pressing the CLEAR button while the track number is displayed. You may
then continue the review procedure.
RANDOM Button (remote only)
This instructs the CD player to play tracks from the entire disc in random
order. Once all of the selections have been played once, the disc will
stop playing, unless the REPEAT Button (see below) has been engaged,
in which case the random play will continue until the STOP button is
pressed. When the RANDOM button is engaged, the
in the Display.
REPEAT Button (remote only)
This button allows you to repeat the current track or the entire disc
continuously until the feature is cancelled by disengaging the REPEAT
button or pressing STOP. The REPEAT button steps sequentially through
the available options. Press the button once and the RCX-1500 will repeat
just the current track. The icon appears in the Display. Press the button
a second time and the RCX-1500 will repeat the entire disc. A second
icon appears in the Display. Press the button a third time to cancel the
REPEAT function. As noted above, REPEAT can be used in conjunction with
the RANDOM play feature. The REPEAT and RANDOM play combination
can also be used when playing CD-DA discs.
Note: The REPEAT function is automatically cancelled when the disc is
ejected.
SCAN Button (remote only)
This feature automatically plays the first ten seconds of each track on
the disc (or the memorized program). To activate the feature, press the
SCAN button. The icon appears in the Display. To stop scanning and
resume normal operation at the current track, press the SCAN button
again or press the PLAY / button.
The RANDOM and SCAN play combination can also be used when
playing CD-DA discs.
TIME Button (remote only)
Normally, the RCX-1500 displays the elapsed time of the currently
playing track. The TIME button allows you to see alternative time displays.
Pressing the button once displays the time remaining in the current track,
which counts down as the track continues playing. Pressing the button a
second time displays the time remaining on the entire disc (or memorized
program). When the alternative time displays are selected an "R" icon
appears in the display. Pressing the button a third time reverts to the
standard elapsed time display.
Note: When playing MP3 and WMA discs, only the regular elapsed
time and the time remaining in the current track can be displayed.
icon appears
19