scale on, pressing the ON-TARE-OFF key.The display will show"0g"or "0.00 oz";
now the scale is ready to be used. ATTENTION: PLACE THE FOOD ON THE SCALE
BOWL ONLY WHEN THE DISPLAY HAS SHOWN" 0". In order to switch the product
off, press ON-TARE-OFF key.
Tare function
Switch on the scale first. In order to exclude the weight of any container, place it on
the scale platform and then press the ON-TARE-OFF key. Now you can read"0"on
the display. You should carry out this procedure before placing the food on the
scale. NB: Whether the container is placed on the platform before you switch the
scale on, the scale will exclude the container weight automatically.
Negative Value
When all the weight (included the container) is removed from the scale platform,
you will read a negative value on the display. In order to reset the scale to"0", just
press the ON-TARE-OFF key.
ON-TARE-OFF switching
Press the ON-TARE-OFF key to switch the scale on and off.
Auto-shut off
The product switches itself off, after some seconds of non-use.
Overload indicator
When the weight exceeds the scale capacity (5 kg), the display shows:"o-Ld".
Remove the excessive weight immediately in order to avoid product damages.
Low battery indicator
Whether the display shows "Lo", this means that batteries are flat and it is
necessary to replace them. Open the batteries compartment, placed under the
scale, and replace the flat battery by 1 new CR2032 batteries, respecting the
polarities shown in the compartment itself.
The supplied batteries are for trial use only and they may have a shorter life.
MAINTENANCE AND CARE
Place always the product on a flat and stable surface. Please clean the appliance
with a damp and soft cloth avoiding any water seepage inside the scale. Do not use
chemical detergents. Never deep the product into water. Avoid shaking, dropping
or shocking the scale. This is a precision instrument and must be handled with
care. Never try to repair the scale by yourself but always address to specialised
centres; otherwise, the warranty will be not valid anymore. It is advisable to store
the scale in a clean place. Dust, dirt, moisture, vibration, air currents, can all cause
an adverse effect on the reliability and accuracy of your scale. When the unit is not
used for a long period of time, it is advisable to remove battery, as their leaking
can damage the appliance. When the scale is switched off, never place or lay any
objects on it.
In case of malfunction:
Check that the batterie is inserted properly.
If problems persist, contact the Service Centre JOYCARE.
6