Bürkle MiniSampler PTFE Instrucciones Para El Uso página 4

English
General safety requirements
` ` Read these directions for use carefully before using.
` ` Keep these directions for use where they will be
accessible for all users.
` ` Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
` ` The instrument must only be used by qualified
skilled employees.
Safety instructions before using
` ` Follow the manufacturer's instructions and safety
instructions of the medium you are sampling.
` ` When sampling hazardous substances, follow the
technical rules on hazardous substances (in accordance
with TRGS – (German) Technical Rules on Hazardous
Substances) and wear appropriate protective equipment.
` ` Damage to the respiratory tract and other organs
due to off-gassing media. Use in ventilated rooms or
under a suitable exhaust hood.
` ` The instrument is not suitable for sampling highly
flammable/explosive liquids.
` ` The instrument is not suitable for aggressive acids
and bases. Vapours could destroy pump.
NOTE!
Before using, the instrument has to be cleaned to
the extent of your (validated) cleaning process.
` ` Measures of manual cleaning have to be carried
out in the cleaning/desinfection area and under
consideration of occupational health and safety.
` ` Pay attention to the material resistance.
Safety instructions during and after use
CAUTION!
Liquid entering the instrument due to overfilling
or tipping. Bodily injury due to escaping liquid and
damage to the instrument.
` ` Shut down and secure the instrument immediately.
` ` Contact the dealer or manufacturer.
` ` The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
` ` Do not hold the instrument inclined, lay it down or
store it, when the sample box is filled.
` ` The instrument is not suitable for cleaning in a
dishwasher.
Layout and function
` ` The instrument is made of non-conductive material
and is suitable for sampling non-combustible liquids
from a maximum suction depth of 5 m.
` ` The instrument is suitable for sampling liquids from
0 - 60 °C.
` ` The instrument is only suitable to take samples and
not for continuous operation.
` ` Only use the instrument with the recommended
sample boxes specified in the accessories.
` ` Protect the instrument against effects of weather
exposure during storage.
` ` The instrument is maintenance-free.
Parts in contact with medium
` ` PTFE (suction hose)
` ` PFA (suction box)
` ` Stainless steel, brass nickel-plated (hose weight)
Parts not in contact with medium
PA (pump head)
` `
` ` POM (pump cylinder)
` ` PTFE (thread adapter)
` ` NBR (gaskets)
Scope of delivery
1 x MiniSampler Vacuum pump
1 x Sample box, 180 ml (PFA)
1 x Suction hose (PTFE, 5 m)
1 x Hose weight (stainless steel, brass
nickel-plated))
1 x Hose cutter
1 x Directions for use
20 x Seal-it lead bottle seals
1 x Transport case
` ` Check delivery for completeness and transport
damage.
` ` Point out any damage in the packaging to the
freight forwarder/supplier immediately.



