Bosch GSA18V-125 Instrucciones De Funcionamiento Y Seguridad página 12

1607000CE4.qxp_GSA18V-125 4/11/17 3:08 PM Page 12
INSIDE. Preventive
performed by un au thorized personnel
may result in misplacing of internal wires
and components which could cause
serious hazard. We recom mend that all tool
service be performed by a Bosch Factory
Service Center or Authorized Bosch Service
Station. SERVICE MEN: Disconnect tool
and/or charger from power source before
servicing.
BATTERIES
Be alert for battery packs that are nearing
their end of life. If you notice decreased
tool performance or significantly shorter
running time between charges then it is time
to replace the battery pack. Failure to do so
can cause the tool to operate improperly or
damage the charger.
TOOL LUBRICATION
Your Bosch tool has been properly lubricated
and is ready for use.
Standard equipment
- Reciprocating saw blades
Maintenance
Service
NO USER
SERVICEABLE PARTS
maintenance
Accessories
The use of any accessories not specified in this manual may create a hazard.
D.C. MOTORS
The motor in your tool has been engineered
for many hours of dependable service. To
maintain peak efficiency of the motor, we
recommend it be examined every six
months. Only a genuine Bosch replacement
motor specially designed for your tool should
be used.
Cleaning
To
always disconnect the
tool and/or charger from the power supply
before cleaning. The tool may be cleaned
most effectively with com pressed dry air.
Always wear safety goggles when cleaning
tools with compressed air.
Ventilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects
through opening.
Certain cleaning agents
and solvents damage
plastic parts. Some of these are: gasoline,
car bon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
Optional accessories
- Carrying bag;
- Carrying case
-12-
avoid accidents,