Wearing The Headset - Zipy GO EarAir Guía De Usuario

The headset can connect with two devices at most. One is a Bluetooth
mobile phone supporting HFP profile, the other one is a Bluetooth music
device supporting A2DP profile. If you want to finish the multi-pairing,
please refer to the following steps:
1) Firstly, pair the headset with a Bluetooth transmitter (refer to "pairing the
headset with a Bluetooth transmitter);
2) Switch off the Bluetooth transmitter;
3) Pair and connect the headset with a Bluetooth mobile phone (refer to
"pairing the headset with a Bluetooth mobile phone").
4) Switch on the Bluetooth transmitter, it will connect to the headset
automatically.
Notes:
After successful pairing, the paired devices will remember each other.
Unless pairing information is deleted because of new pairing, they will
no need to pair next time. If the pairing information is deleted, please
connect the mobile phone with the headset first and then switch on the
Bluetooth transmitter, multi-connecting can be performed.
For the mobile phone supporting the HSP and A2DP at the same time. It
may set up HSP and A2DP connection with the headset simultaneously.
At this time, the Bluetooth transmitter may not connect to the headset.

3. Wearing the headset

As per the following pictures show, hand the headset on your both ears. You
must use both hands to put on or take off the headset, don't pull or push the
headset.
7