Astralpool WELLMA 1-S Manual De Uso E Instalación página 43

Affix the upper frame to
FIG Nº 16
the wall modules with 80
mm screws.
Place the roof modules as
FIG Nº 17
they are marked on the
frame and on the module.
To put the last module in
FIG Nº 18
place, as indicated in the
photo, drop it into place
and adjust it from outside
the sauna.
10
Affix all of the roof
FIG Nº 19
modules to the upper
frame with 60 mm screws.
Pass the sensor line
FIG Nº 20
through the hole reserved
for it, then connect it to the
control panel.
Pass the light cable
FIG Nº 21
through the hole reserved
for it, then connect it to the
control panel.