Pleasant Hearth PH26D Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
4. Insert 4 dowels (CC) into pre-drilled holes in
front panel (G). Slip left side panel assembly
over dowels (CC) on the left side of front panel
(G). Slip right side panel assembly over dowels
(CC) on the right side of front panel (G). Make
sure both panels are snug, then secure with
washers (BB) and bolts (AA) inserted through
pre-drilled holes as illustrated. Tighten with
screwdriver.
5. Set top panel (A) on top of assembly. Secure
from the inside with bolts (AA) and washers
(BB) through predrilled holes as illustrated.
Tighten with screwdriver.
6. Insert 3 dowels (CC) into pre-drilled holes
along back edge of top panel (A). Slip corner
panel (H) over dowels (CC) until snug. Secure
with bolts (AA) and washers (BB) through
predrilled holes as illustrated.
4
G
5
A
6
4
H
CC
CC
BB
AA
CC
BB
AA
BB
AA