Placing Jumper Links - Miller Syncrowave 250 DX Manual Del Propietário

3-17. Placing Jumper Links

Label found on 350 LX models with the following stock numbers:
907198, 907198-011, 907198-021, and 907198-031
2
200 VOLTS
1
L
Label found on 250 DX models with the following stock numbers:
907195, 907195-021 and, 907195-031
Label found on 350 LX models with the following stock numbers:
907199, 907199-021, and 907199-031
230 VOLTS
1
L
Label found on 250 DX models with stock number 907197
Label found on 350 LX models with stock number 907200
1
Tools Needed:
3/8 in
Label found on 250 DX models with the following stock numbers:
907194, 907194-021 and, 907194-031
230 VOLTS
L L L
Or
460 VOLTS
L L L
Or
Y Disconnect and lockout/tag-
Check input voltage available at
site.
460 VOLTS
1
Check label − only one label is on
unit.
L L
2
083 566-E
Move jumper links to match input
voltage.
Close and secure access door, or
go on to Section 3-18.
575 VOLTS
L L
010 587-D
out input power before
installing or moving jumper
links.
Jumper Link Label
Jumper Links
191 440-A
Ref. 803 585-C
OM-363 Page 23