Gate House 801-32-WHT Instrucciones De Ensamblaje

PACKAGE CONTENTS
A
PART DESCRIPTION
A
Security Door
Styles may vary
HARDWARE CONTENTS
DESCRIPTION
PART
AA 4 in. one-way screws
BB Top bar
CC Locking side bar
NOTE: All parts not shown at actual size.
PREPARATION
Tools Recommended for Assembly (not included)
One-way screw tool, drill 3/16 in. bit, level or string plumb, measuring tape and pencil.
IMPORTANT: Read all instructions carefully before starting installation.
Questions, problems,missing parts?
Before returning to your retailer, call our customer service department at 1-877-442-8347, 8 a.m.-8 p.m., EST, Monday-Friday.
AB14898
ITEM #0637205/#0637206/#0637207/#0637208
SENTRY SECURITY
SCREEN DOOR
MODEL: 801-32-WHT/801-36-WHT/801-32-BLK/801-36-BLK
QUANTITY
1
QUANTITY
AA
CC
8
1
1
BB
ASSEMBLY INSTRUCTIONS
1.Identify which way the security
1
door is to open.
2.Install the lockset (sold separately)
2
with 2-3/8 in. backset. Then, fully
extend the lock bolts into the " locked"
position.
3.Place security door in front of opening
3
at desired height, making sure that
the security door is vertical (plumb).
Determine where to drill by marking
through the pre-drilled holes on the
hinge-side jamb with pencil.
4.Drill holes. Using screws (AA), fasten
4
door to house.
Tighten screws (AA) only halfway
at this time in case repositioning the
door is required later.
CARE AND MAINTENANCE
1. Security doors are finished with a heavy-duty powder coat finish. In order to maintain your finish, it is recommended
to clean and wax the security door 2 times per year, preferably in late fall and early spring. Doors directly subjected to the sun,
salt-air or moisture may require more maintenance.
2. Any scratches or abrasions to the door finish should be immediately touched up with enamel or rust protective paint.
3. To keep your door looking like new, any signs of rust should be sanded with mild sandpaper and touched up immediately
with enamel or rust protective paint.
4. Hinges and lockset (sold separately) should be oiled and lubricated regularly to reduce friction wear.
5. Make sure any sprinklers near your new door are directed away.
6. Do not allow vegetation on your security door. This will lead to extra maintenance.
7. Make sure to keep your weed eater and lawn mower away from your security door. It may create unwanted chips to your
door finish.
WARRANTY
In the event that our products or any parts thereof should prove to be defective in material or workmanship, under normal use and service, and
such defects are reported to us within one (1) year from the date of purchase, at our option, we will repair or replace the door. Replacement items
may vary in style due to changes in suppliers and product. In addition, the paint finish is warranted not to blister, crack, or fade for one year from
the purchase date. Damage due to rust is excluded from this warranty. Screens, glass and hardware are also excluded from this warranty. This
warranty does not cover damage caused by vandals, break-ins, or attempted break-ins. This warranty is voided if the products is modified in any
way. We assume no responsibility for incidental or consequential damages arising from defective products; nor do we assume any responsibility
for failures, breakage or cost which result from abuse, abnormal use, misuse, negligence, accident, exposure to corrosive fumes, condensates,
fire or damage as a result of improper installation. Except as stated above, we make no warranties, either expressed or implied, as to any matter
whatever, including without limitation, the condition of our products ,their merchantability or fitness for any particular purpose. We assume no other
expense such as labor costs of any kind for removal, replacement or parts, repairs or reinstallation.
5.Align the lock bolt holes in the locking
5
side bar (CC) with the extended lock
bolts, making sure the locking side bar
(CC) is vertically true (plumb).
6.Mount the locking side bar (CC) to door
6
frame jamb. Drill holes. Fasten the locking
side bar (CC) to the house using the
screws (AA). Tighten screws (AA) only
halfway at this time. When you are
satisfied with the position and operation
of the security door, tighten screws (AA)
securely to the house.
7.Mount top bar (BB) at top of door
7
using remaining 2 screws (AA).
Leave approximately 1/8 in. space
between top bar (BB) and top of
door frame.
Printed in China