Keneksi K6 Guia Del Usuario página 4

EU regulatory conformance Body worn operation
The device complies with RF specifications when used near your ear or at a distance of 1.5 cm from your body. Ensure that the
device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from
your body to meet the distance requirement.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with
other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to
promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return
system.Declaration of Conformity KENEKSI declares that this device complies with the essential requirements and relevant provisions of
Directive 1999/5/EC.Go to www.keneksi.com\certification to view the Declaration of Conformity.
The following marking is included in the product:
Introduction
Thank you for having bought the KENEKSI cell phone. Besides the GSM network access, the device combines: best quality
sound, original slim design, bright display, easy-to-use menus in multiple languages.
Important

Please read this guide before using the device to ensure safe and proper use. Here is information on the functions
available on your device.

Additional features and services depend on a cell phone model, software, or a service provider.

Any changes in the device may lead to loss of warranty.
Work with the device
Battery
Note:
Charge the battery before using it for the first time.
The battery is supplied with the device. The battery level is shown in the upper corner of the display.
Installing the battery
1. Remove the back cover.
2. Insert the battery so that the metal battery contacts touch the contacts in the phone.
3. Replace the back cover.
Removing the battery
1. Turn off the phone.
2. Open the back cover.
3. Remove the battery.
Charging the battery
Use the charger supplied with the phone.
Warning! If you use unappropriate chargers, it may damage the phone and the device.