En 60950 - hager MD500 Guia De Inicio Rapido

GB
● Put the control panel in the normal mode and carry out a real test.
Check the reaction of the control panel (or telephone dialer interfa-
ce) using the following table.
Chanel Response of the control
panel in the normal mode
Alert Call The integrated siren is
sounded for 90 secs and
the alarm is memorised
Silent Alarm No reaction.
The Silent Alarm
is memorised on
control panel
Audible Signal 4 audible beeps
and no memorisation
If the control panel (or telephone dialer interface) responds as
described above, the medallion implementation procedure is com-
plete.
FIG. F
Closing
❶ Place the medallion cover sliding part opposite the base rail and
press to fit the two parts together.
❷ Slide the cover on the base until the medallion case is comple-
tely closed.
The medallion is now ready to use.
INDICATION OF LOW BATTERIES
The batteries are low when the light indicator only comes on faint-
ly or not at all. In this case, see your local dealer.
16
Reaction Reaction of the
of the sirens telephone dialer
Sounded Alert terminal
for 90 secs connection is
activated for 1,5 sec
No reaction Prog. 1 or Prog. 2
terminal connection
is activated
for 1,5 sec
No reaction No reaction
DECLARATION OF CONFORMITY
Manufacturer: Hager Security SAS
Address: F-38926 Crolles Cedex - France
Product type: Medallion
We declare under our sole responsibility that the products to which this declaration relates
are thus compliant with the essential requirements of the following European Directives:
• R&TTE Directive: 99/5/CE
• EMC Directive: 89/336/CEE
• Low Voltage Directive: 73/23/CE
in compliance with the following harmonised European Standards:
Products code
EN 300 220-3
EN 300 330-2
EN 300 440-2
EN 301 489-1 & 3
EN 55022 & 55024

EN 60950

TBR 21
These products can be used in all EU, EEA Countries and Switzerland.
Crolles 07/07/04 Signature:
Patrick Bernard
Research & Development Manager
GB
MD500
X
X
X
17