• Drill the wall and push correct sized plugs for the screw you are using into the wall.
• Place the handle up to the wall, and drive the screws
• Tighten well the screws.
• Finally, clip the screw cover over the flanges. This will give to your handle an
elegant appearance and hide the screw head.
Note:
Stainless steel screws are recommended to reduce the risk of rust.
9. HOW TO USE
The safety bath handle if horizontally placed becomes an efficient foothold for movement
such as sit or stand up from wc.
WARNING!
Don't bear down on the handle with whole body weight, just use the handle as support
for movement.
10. TECHNICAL FEATURES
MATERIAL: the grab is composed by PVC and the end parts in ABS
Dimension
D = diameter
L = length
RS972-
30 diameter 36 mm -
length 30 cm
RS972-45
diameter 36 mm - length 45 cm
RS972-60
diameter 36 mm - length 60 cm
11. CLEANING AND DISINFECTION
11.1 Cleaning
Use a damp cloth and mild soap. Then dry thoroughly before use.
11.2 Disinfection
If you need to disinfect the device use a common disinfectant cleaner.
Note:
Never use acids, alkalis or solvents such as acetone.
12. CONDITIONS OF DISPOSAL
In case of disposal don't use the inserting container for municipal waste. It is recommended
to dispose of the device through the municipal sorted waste collection centre for the planned
recycling operations of the materials used.
D
L
5