Troubleshooting - Steinbach Digitales Funk Pool Manual De Instrucciones

2. Place the product in the original packaging box.
If you no longer have this packaging box, use a similar container with a
matching size.
3. Place this manual and all parts of the delivery inside the box.
4. Store the packaged product in a cool and dry place.
The product is properly packaged and stored.

Troubleshooting

Error
Temperature display shows
"HH.H".
Temperature display shows
"LL.L".
Temperature display shows
"--.-".
Temperature display shows
"--.-".
Temperature display shows
"--.-".
Temperature display shows
"--.-".
Outdoor unit shows
"-50 °C" or "ERROR"
If the problem cannot be solved, contact the customer service listed on the
last page.
Possible cause and solutions
The measurement values are above the
measuring range.
The measurement values are below the
measuring range.
The signal from the outdoor unit is not being
received.
- see "Manual transmitter search"
The batteries of the outdoor unit are empty.
- see "Inserting or changing batteries"
There is too much distance between the
outdoor unit and the indoor unit.
- Position the units closer to each other
(max. 60 m)
Incorrect channel is set on the indoor unit.
- see "Additional outdoor units"
Contacts on the circuit board are not
properly aligned - values are not transmitted
correctly.
- Open the housing of the outdoor unit
and make sure that the display screen is
inserted as described in the "Inserting
or exchanging batteries" section and
that the housing of the outdoor unit is
properly closed.
31