Adjust Reverb Function; Record Function; Playback Function - Singing Machine SOUNDX SMI-1450 Manual Del Usuario

Adjust Reverb Function

Press the [reverb] button to enter the reverb function.
In this menu, the digit on the far left of the LED will
display letter 'R'. The two digits on the right will display
the current reverb level. The select [+] / [-] buttons or
[dial] can be used to adjust the reverb level (0-3, not
loop). This value will be auto-saved after adjusted.

Record Function

Prepare to Record
Select the desired song, drum kit, tempo, drum off
setting, and reverb settings.
Start Recording
Press the [rec] button, the light will begin flashing.
Press the [start/stop] button or strike the pad, the
light will stop flashing and the recording process
begins.
Stop Recording
To stop recording, press the [start / stop] button or
[rec] button. The record indicator will turn off. If the
memory is full, "FL" will appear on the display and the
recording process stops automatically.
Note:
When you start the recording, the vocal metronome
also starts to count. However the sound of the vocal
will not be recorded. To stop the metronome, press the
[click] button.

Playback Function

Pressing the [play/stop] button will start or stop
playing the recorded song.
Note:
When you record a new song, it will replace the
previous recording. The song data recorded will be lost
when you turn off the power.
E12