Assembly (continued)
9
Preparing the Doors
□
Locate the two doors (Q) and place on a soft surface
to protect the finish.
□
Attach the two hinges to the doors (Q) by inserting
four hinge screws (HH). Repeat this step for the
second door (Q). Do not trip the hinge screws (HH) by
overtightening.
10
Attaching the Doors to the
Mantel
□
Attach the two doors (Q) to inside of the mantel by
tightening the screws on the hinge. Do not strip the
hinge screws (DD) by overtightening.
□
Open and close the doors to ensure they are aligned
and shut correctly. If necessary, adjust the screws
for a good fit.
Qx2
D
Q
1
9
Please contact 1-800-986-3460 for further assistance
HH
HH
Q
2
HOMEDEPOT.COM/HOMEDECORATORS
GG
E