Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
S-12572
3M HEADGEAR
3M protective headgear can only be used with 3M
faceshields. This headgear/faceshield combination is
designed to be used when the user is likely to come
in contact with flying particles and liquid splash as
long as use is consistent with all instructions, product
warnings and eye and face protection regulations
and standards.
Figure 1a
PAGE 1 OF 3
1-800-295-5510
uline.com
ASSEMBLY
Figure 1b
1. Align the star shaped notches located on both ends
of the face shield onto the headgear. (See Figure 1a)
2. Rotate the faceshield towards the headgear making
sure that the faceshield is in front of the flange.
(See Figure 1b)
3. Force the faceshield into the headgear until you
hear it snap into place. (See Figure 2)
NOTE: To remove, pull back on the locking
mechanism tab until the star shaped holes are
aligned and remove the face shield.
Figure 2
Locking Mecha-
nism Tab
Para Español, vea página 2.
Pour le français, consulter la page 3.
Flange
1020 IS-12572
Publicidad
Manuales relacionados para Uline 3M
Resumen de contenidos para Uline 3M
- Página 1 1-800-295-5510 uline.com 3M HEADGEAR ASSEMBLY 3M protective headgear can only be used with 3M 1. Align the star shaped notches located on both ends faceshields. This headgear/faceshield combination is of the face shield onto the headgear. (See Figure 1a) designed to be used when the user is likely to come 2.
- Página 2 3M EQUIPO PARA LA CABEZA ENSAMBLE El equipo protector para la cabeza 3M solo se puede 1. Alinee las muescas con forma de estrella ubicadas usar con caretas 3M. Esta combinación de equipo en ambos extremos de la careta en el equipo para para la cabeza y careta está...
- Página 3 1-800-295-5510 uline.ca 3M – HARNAIS MONTAGE Le harnais de protection 3M ne peut être utilisé 1. Alignez les encoches en forme d'étoile, situées aux qu'avec les écrans faciaux de 3M. Cet ensemble deux extrémités de l'écran facial, sur le harnais.