Overview; Design And Function; Main Parts; Labels - Chicago Pneumatic CP 0009 Instrucciones De Seguridad Y De Funcionamiento

CP 0009, CP 0014

Overview

To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.

Design and function

CP 0009 and CP 0014 are combined drilling and
breaking machines, designed for horizontal and
vertical use.
CP 0009 is equipped with a quick-change retainer
and has right-hand rotation. The machine can be
adapted for drilling or breaking by changing the
insertion tool or by activating the rotation release
depending on model. Examples of use are drilling,
chipping or chasing in concrete or brick. No other
use is permitted.
CP 0014 is equipped with a spring type retainer and
has right-hand rotation. The machine can be adapted
for drilling or breaking by activating the rotation
release. Example of use as a rock drill are drilling in
granite, concrete, limestone, or brick, or other similar
materials. As a hammer can it be used for chipping
or chasing in concrete or brick. No other use is
permitted.
To choose the correct insertion tool, see the spare
parts list.

Main parts

A
B
F
D
C
CP 0009
9800 0547 90c | Original instructions
A
B
C
CP 0014
A. Handle
Air inlet nipple
B.
Tool retainer
C.
D. Muffler
E. Start and stop device
Lubricator
F.
Rotation release
G.
Side bolt
H.

Labels

The machine is fitted with labels containing
E
important information about personal safety and
machine maintenance. The labels must be in such
condition that they are easy to read. New labels can
be ordered from the spare parts list.
H
G
Safety and operating instructions
E
F
D
G
H
11