Power Connection - Zyxel GS-105A Guía De Usuario

ENGLISH
Do not block the ventilation holes.
Hardware Connection
The power and the Ethernet ports are located on the rear panel.
Rear PanelGS-105A
Rear Panel: GS-108A

Power Connection

Connect one end of the supplied power adaptor to the power port on the
rear panel of the switch and the other end to the appropriate power source.
The PWR LED turns on.
RJ-45 Auto-negotiating Ports
The switch comes with 5 or 8 10/100/1000M RJ-45 ports depending on
the model of your switch. The auto-negotiation feature allows the switch
to detect the speed of incoming transmission and adjust appropriately
without manual intervention. It allows data transfers of 10 Mbps, 100
Mbps or 1000 Mbps in either half-duplex or full-duplex mode depending
on your Ethernet network.
2