Leister LE 5000 DF Instrucciones De Funcionamiento página 43

PLASTIC WELDING PRODUCTS | INDUSTRIAL HEATING & LASER SYSTEMS
Leister Technologies AG | Galileo-Strasse 10 | 6056 Kägiswil | Switzerland
phone: +41 41 662 74 74 | leister@leister.com | www.leister.com | www.weldy.com
Company
Declaration of incorporation
Titel
First Last Name
(in terms of the EC machinery directive 2006/42/EC; Appendix II B)
Address
City, St. Zip
Leister Technologies AG
Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland
hereby declares the partly completed machinery
Designation
Subject
Type
Option
- as far as it is possible from the scope of supply – fulfills the applicable essential
requirements of the EC machinery directive (2006/42/EC).
The partly completed machinery furthermore complies with the provisions of the following
EC directive(s):
EC directive(s)
Harmonised standards
Best regards
Leister Technologies
In addition, we declare the relevant technical documentation for this partly completed
machinery is compiled in accordance with Annex VII (part B) and will be electronically
First Last Name
transmitted to national authorities in response to a reasoned request. Title
Authorised documentation representative: Volker Pohl, Manager Product Conformity
The partly completed machine must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the EC
machinery directive (2006/42/EC), where appropriate.
Kaegiswil, 24.11.2017 06.05.2019
.......................................
Bruno von Wyl
(Chief Technical Officer)
Your Ref.
Our Ref.
Phone direct
Fax direct
E-mail
Date
Air Heater
LE 5000 DF; LE 10000 DF
-
2014/35/EU (Low Voltage Directive)
2011/65/EU (RoHS Directive)
EN 12100 EN ISO 12100
EN 62233, EN 60335-2-45
EN 50581
Thomas Schäfer, Manager Product Conformity
.......................................
Christoph Baumgartner
(General Manager)
First Last Name
+41 (41) 662
+41 (41)
@leister.com
1/1