EN
The company thanks you for purchasing our production equipment.
It is recommended that you read the contents of this manual on the operation, installation and
maintenance of the product.
The manual is intended to familiarize the user with the device and the principle of using the
product.
Read this manual carefully before using the product.
During the operation, carefully handle the product, do not allow mechanical damage to parts.
Keep the product clean.
HURAKAN washstand is designed for washing hands in public catering establishments.
The washstand can be used as stand-alone equipment or as part of technological lines
(recommended).
1.Knee switch
2. Spout
3. Foot switch
4. Siphon
5.Passport
Parameter name
2. The bath volume, dm³.
3. Overall dimensions, mm ± 2
4. The size of the container, mm ± 3
The washstand has a stainless steel sink with a side wall, a tap hole and a welded case. The
case can be rectangular or angled, made of stainless steel and fixed to the wall with screws.
5. Preparing the product for work. Operation procedure
Remove the packaging, assemble the product according to the assembly diagram, the product is
ready for operation.
Maintenance and repair of the washstand is carried out by specially trained personnel.
The scheduled maintenance and current repairs are carried out according to the approved
structure of the repair cycle. Monthly check the reliability of fastening to the wall.
The manufacturer systematically works on improving the design of the products, examines the
experience of operation with consumers and will be grateful for suggestions aiming at
improving it.
The manufacturer reserves the right to make changes in the design of the products without
6
FOR BUYER'S INFORMATION:
Introduction
1. Use of the product
2. Delivery set
3.Technical characteristics.
length L
width B
height H
length
width
height
4. The structure and the operation principle.
6. Maintenance
12/300
12/301
1
1
1
1
1
1
HKN-
HKN-
400/320
400/320
13,5
13,5
400
400
300
300
200
200
355
355
255
255
150
150
12/302
1
1
1
1
HKN-
HKN-
400/320
360/360
13,5
13,5
400
360
300
360
850
210
355
360
255
360
150
200