Kinetec PATTERSON MEDICAL Manual De Instrucciones página 10

QUICK START MANUAL • Spectra Essential
Setting the movement parameters
Press the On/Off switch next to the power supply cable.
Press the
viously.
Press the
Press the
To change the extension limit: press the
then the or
To change the flexion limit: press the
then the or
Locking/unlocking the handle,
Press the
Installing the patient
• Stop the machine in a position that is comfortable for the patient.
• Loosen both buttons (1) and extend the foot plate (2) as far as it will go.
• Measure the patient's femur length (L).
• Loosen both buttons (3) then transfer the measurement to the gra-
duated scale (4), tighten both buttons (3).
• Install the patient on the machine.
• Bring the board (2) into contact with the patient's foot, then tighten
both buttons (1).
Refer to the user manual for more detail.
button to start movement with the settings used pre-
button to stop movement.
button to restart movement in the opposite direction.
buttons within 5 seconds to set the limit.
buttons within 5 seconds to set the limit.
and buttons at the same time.
button,
1
2
button,
3
4
L
EN