PNI Safe House PG300 Manual De Utilización página 20

programming password + [45] + delay (001~180 sec) + # .
For example: to set an arm delay of 80 send SMS: 888845080# .
Alarm siren duration
To set alarm siren duration select „Alarm siren duration" app option or send
SMS: programming password+ [46] + siren duration (001~180 sec) + # .
For example: to set a duration of 60 sec send SMS: 888846060# .
Sound confirmation on arm/disarm
To set sound confirmation on arm/disarm select „Other functions" app option or
send SMS: programming password + [75] + [0/1] + # (0 - disable / 1 - the siren will make a
short beep on system arm/disarm).
Enable siren on SOS alarm
To enable siren on SOS alarm select „Other functions" app option or send SMS:
programming password + [76] + [0/1] + # (0 - disable siren / 1 - enable siren on SOS
alarm).
NOTE: The siren settings from the app apply only to the wired siren connected to the
control unit of the system, it will have no effect on the wireless siren.
SMS confirmation on arm/disarm
To set sound confirmation on arm/disarm select „Other functions" app option or
send SMS: programming password + [77] + [0/1] + # (0 - disable function / 1 - you will
receive a SMS every time you arm or disarm the alarm system).
Enable/disable key sound (not available for this model)
SMS warning for power failure
To receive a SMS when system power is off select „Other functions" app option
or send SMS: programming password + [80] + [0/1] + # (0 - disable function / 1 - you will
receive a SMS when the main unit power is off).
For example: to activate this function send SMS: 8888801# .
System date&time
To set the correct date and time in the system select „System date&time" or send
SMS: programming password + [32] + year (4 digits) + month (2 digits) + day (2 digits) +
hour (2 digits) + minutes (2 digits) + seconds (2 digits) + # .
For example: to set the date 26.08.2016 and time 16:00:00 send SMS:
88883220160826160000# .
Auto arm/disarm
The system let's you set 3 auto arm times and 3 auto disarm times
Set auto arm: select „Auto arm" app option or send SMS: programming password +
Ÿ
[33/34/35] + hour (2 digits) + minutes (2 digits) + # .
For example: to set the first auto arm to 23:00 send SMS: 8888332300# .
Set auto disarm: select „Auto disarm" app option or send SMS: programming
Ÿ
password + [36/37/38] + ora (2 digits) + minutes (2 digits) + # .
19 19
EN