Chauvet Fallout Guía De Referencia Rápida página 2

Fallout™ QRG
About This
Guide
Disclaimer
Safety Notes
Contact
What Is
Included
To Begin
The Fallout™ Quick Reference Guide (QRG) has basic product information
such as mounting, menu options, and DMX values. Download the User
Manual from www.chauvetlighting.com
The information and specifications contained in this QRG are subject to
change without notice.
These Safety Notes include important information about installation, use, and
maintenance.
• This product is not intended for permanent installation.
• ONLY connect this product to a grounded and protected circuit.
• Always disconnect from power before cleaning or replacing the fuse.
• DO NOT look at the light source when the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect this product from power cord by pulling or tugging on the
cord.
• When mounting this product overhead, use a safety cable.
• DO NOT allow flammable materials close to the unit while operating.
• DO NOT touch this product when it is operating because it may be hot.
• DO NOT operate this product if the housing, lenses, or cables appear damaged.
• The voltage of the outlet to which you are connecting this product must be
within the range stated on the decal or rear panel of the product.
• This product is for indoor use only! (IP20) To prevent risk of fire or shock,
do not expose this product to rain or moisture.
• Always mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the unit's housing are blocked.
• Never connect this product to a dimmer or rheostat.
• Replace the fuse with the same type and rating.
• ONLY use the hanging/mounting bracket to carry this product.
• The maximum ambient temperature is 104° F (40° C). Do not operate this
product at higher temperatures.
• In the event of a serious operating problem, stop using immediately.
• DO NOT open this product. It contains no user-serviceable parts.
Outside the U.S., United Kingdom, or Ireland, contact your distributor to
request support or return a product. Visit
contact information.
•
Fallout™
•
Power Cord
Unpack your Fallout™ and make sure you have received all parts in good
condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
for more details.
•
Warranty Card
•
Quick Reference Guide
2
www.chauvetlighting.com
EN
for