Technical Data - NUK 10.252.059 Instrucciones De Operación

Medicinal product to 93/42/EEC
Temperature range
– Operation
– Storage
Power supply:
– Mains operation via power plug
– Battery operation
EMC Guideline to EN 60601-1-2:2001:
Guidelines and manufacturers declaration - Electromagnetic emissions
The NUK BP3 Electric Breast Pump is designed for use in the environment specified below. The
customer or user of the NUK BP3 Electric Breast Pump should ensure that it is used in that type
of environment.
Measurement of Interference
Emission
HF-Emission of Interference to
CISPR 14
Emission of Harmonic Oscillations
to IEC 61000-3-2
Emission of Voltage Fluctuations/
Flickers to IEC 61000-3-3
In the European Union the sym-
bol of a crossed-through waste
bin on wheels ("wheelie bin")
means that the product must be
disposed of at a separate collec-
tion point. This also applies to the product and
all accessories marked with this symbol. Pro-
ducts labelled as such must not be disposed of
with normal household waste, but should be
taken to a collection point for recycling electri-

12. Technical Data

Class I
0 °C to +40 °C
0 °C to +40 °C
Input 230 V, 50 Hz, output 3 VDC, 500 mA,
polarity +/-, 5 x 2.1 mm hollow plug
requires 2 Type AA, 1.5 V batteries
Compliance
Complies
Class A
Complies
13. Disposal
cal and electronic equipment. Recycling helps
to reduce the consumption of raw materials,
thus protecting the environment.
Batteries must not be disposed of with household
waste. It is every consumer's legal responsibility to
ensure that batteries are disposed of at a specially
designated collection point.
20
Electromagnetic Environmental
Guidelines
The BP3 NUK Electric Breast Pump
Is not suitable for connecting to
other devices.
The BP3 NUK Electric Breast Pump
is suitable for use in all fittings,
including those in a domestic envi-
ronment as well as those connected
directly to a public supply network
that also supplies buildings used for
residential purposes.