Chauvet Bubble King Guía De Referencia Rápida página 4

Bubble King™ (B-550) QRG
Operation
AC-W wireless controller is now available for use with the
Bubble King™. The AC-W is a wireless trigger that does not need
an external power supply — easy setup and easy teardown.
In addition, the AC-W has an operation range of 100 ft.
(unobstructed) for increased flexibility to trigger the attached
machines from almost anywhere.
1. Place the Bubble King™ on a level surface and loosen the thumbscrews
on the front of the unit for fluid tank access. Lift the cover.
2. Fill the tank with bubble fluid.
Note: Use of CHAUVET® bubble fluid (BJU), specially formulated
for use with CHAUVET® bubble machines, is recommended. The
tank capacity is 56 oz. (1.7 l).
3. Lower the cover and tighten screws.
4. Plug into a suitable wall outlet.
5. Turn on the unit. For remote use, move the switch to Remote and use the
optional remote controller to operate the bubble machine.
Note: Do not leave unused fluid in the reservoir for an extended
period. The fluid may thicken in the reservoir.
4
EN