Avtech KPD Serie Manual De Instrucciones página 4

◄ ►: Go to the upper layer or sub-layer / Make the selection
15) (Enter)
Confirm the password entering.
In the advanced menu, press to confirm the settings and go back to the upper layer.
16) LIST (Event List Search)
To quick search the recorded files by event list, press to show all types of the event lists.
ALARM List the information of the alarm-trigger-recorded files.
MANUAL List the information of the manual-recorded files. The DVR will save one recorded file once any recording setting is changed.
MOTION List the information of the motion-trigger-recorded files.
SYSTEM List the information of the system-recorded files. The DVR system will save one recorded file every one hour.
TIMER List the information of the timer-recorded files.
17) LATEST
Press to playback the latest recorded video.
18) STOP
Press to stop playback and return to the live mode.
19) SLOW
Under the playback mode, press to slowly playback the recorded file (by 1/4 speed or 1/8 speed).
20) ◄◄ / /►►
Under the playback mode, press these buttons to fast rewind / pause / fast forward the playback file.
2.2 Rear Panels
1) INPUT (1 ~ 16CH / 1 ~ 8CH / 1 ~ 4CH)
Connect to video sources, such as cameras.
Note: The DVR will automatically detect the video system of the camera, please make sure that the
cameras are properly connected to the DVR and power-supplied before the DVR is turned on.
Note: If you want to make a video backup with audio, please connect audio cameras to the channels
which support the audio function.
For 16CH & 8CH DVR, the audio channels are CH1, CH2, CH3 and CH4.
For 4CH DVR with a fan built-in, the audio channel is CH1.
2) MONITOR
Connect to a CRT monitor for video output.
3) Audio IN
Connect to audio sources, such as cameras equipped with the audio function.
When users start recording, the audio input will also be recorded with corresponding video channel.
Note: The audio source connected to the "Audio 1" will be recorded with the video of the "CH1".
The audio source connected to the "Audio 2" will be recorded with the video of the "CH2".
The audio source connected to the "Audio 3" will be recorded with the video of the "CH3".
The audio source connected to the "Audio 4" will be recorded with the video of the "CH4".
4) Audio OUT
Connect to a monitor or speaker with 1 mono audio output.
5) IR
Connect the IR receiver extension line for remote control.
6) EXTERNAL I/O
Insert the supplied 25 / 15 PIN DSUB to this port for connecting external devices (external alarm, etc).
For detailed I/O port PIN configuration, please refer to "APPENDIX 1 PIN CONFIGURATION" in the user manual.
7) LAN
Connect to Internet by LAN cable.
4-