NSK Ti-Max X95EX Manual De Operación página 5

3. Mounting/Removing the Bur
3-1 Mounting the Bur ( Fig.1 )
1 ) Connect the handpiece to the motor.
2 ) Depress the chuck release button and insert the bur into the chuck. (
CAUTION
After the Bur is locked in place, lightly attempt to pull out the Bur to ensure the Bur is securely locked
into position.
3-2 Removing the Bur ( Fig.2 )
1 ) Push the chuck release button with the thumb tip. (
2 ) Remove the bur. (
4
)
)
)
Chuck Release Button
Fig. 1
Chuck Release Button
Fig. 2