Making The Electrical Connections - Commercial Electric 53301212 Manual De Uso Y Cuidado

Installation (continued)
4

Making the electrical connections

nOTe: This fixture is intended for use with an electrical box, conduit, and conduit connectors that are UL rated for wet locations and are
properly installed and grounded.
□
For electrical wires coming from the wall at the position of the fixture, feed the wires from the wall through
the vertical opening on the end of the wire cover. See Option A drawing below.
□
For electrical wires running through conduit or a raceway from an electrical box mounted to the wall, feed
the wires through the horizontal opening in the bottom of the wire cover. See Option B drawing below.
□
Connect the hot and neutral (black and white) wires from the fixture arm on the area light (A) to the same
color wires from the electrical box in the wall.
□
Connect the green wire from the fixture arm on the area light (A) to the grounding wire from the electrical
box in the wall.
□
Cover the wire connections using the wire connectors (AA).
□
Wrap the wire connectors (AA) with electrical tape for a more secure connection.
nOTe: If electrical box wiring does not include a ground wire, consult your local electrical code for approved grounding methods.
Option a
A
A
Wire cover
Wire cover
AA
5
Option B
A
AA
Wire cover
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM