brentwood TS-1045BK Manual Del Usuario página 6

• The parts (removable) in contact with food like the egg holder and poacher can be washed
in hot water with sponge and soft detergent or put in the dishwasher.
• Never plunge the appliance in water or all other liquid!
• Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
• Do not immerse the appliance in water
• When excessive scales are deposited on the cooking plate, normal household vinegar can
be used to remove the scales. Dilute the vinegar with water (add 1 part vinegar to 10 parts
of water). Pour the solution onto the cooking plate. Allow soaking for about 30 minutes.
Then pour way the liquid. Wipe the cooking plate clean with a moistened towel.
PROBLEM
Power Indicator
Light is already ON
after plugging
into power outlet.
There are brown
stains on the
Heating Plate.
Eggs are
overcooked or
undercooked.
CAUSE
The Power Button was
unintentionally pushed
to ON prior to plugging
into
power outlet.
Residue from usage.
Not enough water was
used.
POSSIBLE SOLUTION
You cannot push the Power Button again
to turn the egg cooker OFF. Fill
Measuring Cup to "Soft" line, pour into
Heating Plate and plug the Cooker into
power outlet. The Egg Cooker will cycle
through and power OFF automatically
once all water has evaporated. The
Power Indicator Light will turn off. Allow
the unit to rest/cool for 5 minutes and
proceed to follow the instructions in this
manual to use as normal.
Use a paper towel or a dish rag and white
vinegar to clean the Heating Plate.
Be sure to use Measuring Cup for
appropriate amount of water. If eggs are
overcooked, be sure to remove the eggs
promptly when unit beeps.
If eggs are undercooked, your eggs may
be XL or very cold, use additional water
and leave eggs in the Egg Cooker for an
extra few minutes after unit beeps.
6