Technical Description - BAUKER CHT550JN Manual De Instrucciones

ENGLISH
Technical
description
61
CORDLESS HEDGE TRIMMER
With Batteries Ion-Li 18 V
Modelo
Engine
No load speed
Blade length
Cutting capacity
Blade action
Sound Pressure Level
Measured sound power level
Vibration Level
Charging time
- 4A Battery : 2 hours
- 2A Battery : 1 hour
Maximum autonomy in continuous work, with load
- 4A Battery: 10 min
- 2A Battery: 4 min
Always wear ear protection! The declared vibration value, which has been measured by a standardised test
method, can be used to compare different tools with each other and for a preliminary assessment of
exposure.
WARNING: The actual vibration level when using a power tool can deviate from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety precautions
are necessary in order for the user, based on an estimate of exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is run
without load, in addition to the start-up time).
Technical
description
CHT550JN
18 V
1 050 r/min (RPM)
560 mm (22 ")
19 mm (0.7 ")
Double
LPA 80 dB(A), K=3 dB(A)
LWA 90 dB(A), K=3 dB(A)
3,5 m/s , K=1,5 m/s
2
62