Hoover CAPTOR Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
HooverCaptor
10/9/04
DUST CONTAINER & FILTER: REMOVAL
Always switch off and remove the power plug from the electricity supply after
use and before cleaning the appliance or attempting user maintenance as
described in these instructions. Remember: Electricity can be dangerous
J
Press Dust Cup Release Button
K
Tilt Dust Cup down and away from cleaner body
L
Grip Filter frame and remove from Dust Cup
DUST CONTAINER & FILTER: REPLACEMENT
Empty contents of the Dust Cup into waste container and shake Filter
M
over waste container to remove loose dust
N
Return Filter to Dust Cup
Re-assemble Dust Cup to Cleaner body by aligning slot on the Dust Cup
P
with the projection on the underside of the cleaner body. Tilt Dust Cup
up until it locks into place
Please remember that:
1) Some carpets can cause a small build up of static electricity. Any static
discharge is not hazardous to health or the product.
2) A service charge will be made if the cleaner is examined and found in
working order, has not been assembled in accordance with these
instructions, or has been misused.
Do.
Call your nearest Hoover Service Centre in the event of dissatisfaction.
Ensure that all service and repairs are carried out by an authorised Hoover
Service Engineer.
Only use genuine Hoover parts. Always switch off and remove the power plug
from the electricity supply after use and before cleaning the appliance or
attempting user maintenance as described in these instructions.
Remember: Electricity can be dangerous.
Do Not.
Use your cleaner out of doors, on wet surfaces or for wet pick up. Pick up
matches, hot ashes, cigarette ends or anything that may damage the product.
Spray with or pick up flammable liquids, cleaning fluids, aerosols or their
vapours as this may cause risk of fire/explosion.
Stand on, or wrap the power cord around arms or legs when using
your cleaner.
Continue to use your cleaner if it or the plug/power cord appears to be faulty
or damaged. To avoid safety hazards the cleaner must only be repaired by an
authorised Hoover Service Engineer.
3:29 pm
Page 5
5
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido