Intended Use - Hilti VC 60-W Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
▶ avoidance of prolonged contact with dust,
▶ directing dust away from the face and body,
▶ wearing protective clothing and washing exposed areas of the skin with water and soap.
▶ Do not use the appliance to vacuum up flammable, explosive or aggressive liquids (coolants and
lubricants, gasoline, solvents, acids (pH < 5), alkalies (pH > 12.5), etc.).
▶ Switch the appliance off immediately if foam or liquids escape from it.
▶ Wear protective gloves when using the appliance to vacuum up hot materials at temperatures of
up to 60 °C (140 °F).
▶ When working with mineral drilling slurry, wear protective clothing and avoid skin contact with the
slurry (pH > 9: caustic).
▶ Avoid contact with alkaline or acidic liquids. If contact accidentally occurs, rinse with water. In
the event of the liquid coming into contact with the eyes, rinse the eyes with plenty of water and
consult a physician.
3
Description
3.1
Product overview
3.2

Intended use

The product described here is an industrial vacuum cleaner for commercial use. It is designed for wet
applications but it can also be used for dry vacuum-cleaning work.
Use of the product to clean down persons or animals is not permissible. Underwater use is not permissible.
▶ Before beginning work with the product, find out how to operate it correctly and about any hazards
associated with the materials you will be working with and how these materials can be disposed of safely.
▶ Do not use the product for continuous, stationary operation in automatic or semi-automatic systems.
▶ To reduce the risk of injury, use only genuine Hilti accessories and tools.
▶ Use an antistatic suction hose in order to avoid electrostatic effects.
▶ Do not stand on the product (do not use it as a substitute for a ladder).
This product is suitable for the following applications in commercial use:
Vacuum pick-up of mineral drilling slurry with Hilti diamond core bits and Hilti diamond saws and liquid
material up to a temperature < 60 °C (140 °F).
Vacuum pick-up of oil and liquid media up to a temperature < 60 °C (140 °F).
Wet and dry vacuum cleaning to remove non-health-hazardous substances from wall and floor surfaces.
*2333433*
1
2333433
Control switch
@
Manual filter bump-cleaning operating
;
switch
Exhaust air vents
=
Catch
%
Transport handle
&
Suction head
(
Water and waste material container
)
Grip for emptying container
+
Supply cord hook
§
Filter cover
/
Draining hose
:
Intake fitting (suction hose)
English
15

Publicidad

Tabla de contenido
loading

Tabla de contenido