ANCEL FD700 Manual Del Usuario página 14

Press [OK] button, you will need to OK values manually and
it displays as follow：
Press left button to character selection page down.
Press Right button to information page down.
Press [OK] button to next:
Injector Quantity Adjustment
Set ignition switch to OFF
(Position 0).
OK ESC
Press [OK] button to next:
Note: Different models may have different configurations and
special features maybe different.
EN
Injector Quantity Adjustment
In ject...
Next
In jector 1#FC2F A
03028
In jector 2#002F5FF
020
9/9
Injector Quantity Adjustment
The following injector IQA
data is currently stored in the
PCM.
In jector 1:FC2FA03028
In jector 2:002F5FF020
In jector 3:FC201F5028
OK ESC
Injector Quantity Adjustment
Set the ignition switch to ON.
12
OK ESC