Safety Regulations - Stiga MCS 470 Li 80 Serie Manual De Instrucciones

WARNING!: READ THOROUGHLY THE INSTRUCTION BOOKLET
EN
BEFORE USING THE MACHINE. Keep for future reference
INDEX
1. GENERAL INFORMATION .......................................... 1
1.1 How to read the manual ...................................... 1
1.2 References .......................................................... 1

2. SAFETY REGULATIONS ............................................. 1

2.1 Training ................................................................ 1
2.2 Preliminary procedures ....................................... 2
2.3 During operation ................................................. 2
2.4 Maintenance, storage ......................................... 2
2.5 Battery / battery charger ..................................... 3
2.6 Environmental protection .................................... 3
3. GETTING TO KNOW THE MACHINE .......................... 3
3.1 Description of the machine and planned use ..... 3
3.2 Safety signs ......................................................... 4
3.3 Identification label ............................................... 4
3.4 Main components ................................................ 4
4. ASSEMBLY ................................................................... 5
4.1 Assembly components ....................................... 5
4.2 Handle assembly ................................................ 5
5. CONTROLS .................................................................. 5
5.1 Safety key (Deactivation device) ........................ 5
5.2 Handle - Type "I" .................................................. 5
5.3 Handle - Type "II"/"III" - Advanced Series ........... 5
5.4 Cutting height adjustment ................................... 6
6. USING THE MACHINE ................................................. 6
6.1 Preliminary procedures ....................................... 6
6.2 Safety checks ...................................................... 7
6.3 Start-up ............................................................... 7
6.4 Operation ............................................................ 7
6.5 Stop 8
6.6 After operation..................................................... 8
7. ROUTINE MAINTENANCE .......................................... 8
7.1 General information ............................................ 8
7.2 Battery ................................................................. 9
7.3 Cleaning .............................................................. 9
7.4 Nuts and bolts ................................................... 10
7.6 Cleaning the air filter ......................................... 10
8. OCCASIONAL MAINTENANCE ................................. 10
8.1 Cutting means ................................................... 10
9. STORAGE................................................................... 10
9.1 Storing the machine .......................................... 10
9.2 Storing the battery ..............................................11
10. HANDLING AND TRANSPORTATION .......................11
11. ASSISTANCE AND REPAIRS .....................................11
12. WARRANTY COVERAGE ...........................................11
13. MAINTENANCE TABLE ............................................. 12
14. PROBLEM IDENTIFICATION ..................................... 12
15. ATTACHMENTS ON REQUEST ................................ 14
15.1 "Mulching" kit..................................................... 14
15.2 Batteries ............................................................ 14
15.3 Battery charger ................................................. 14
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual contain important
information regarding safety and operation
and are emphasized in this manner:
NOTE OR IMPORTANT
further information on what has already been said,
and aim to prevent damage to the machine.
The symbol highlights danger. Failure to observe the
warning can lead to the risk of injury to oneself and others
and/or damage.
The paragraphs highlighted in a square with
grey spots indicate the optional characteristics
not on all models documented in this manual.
Check if the characteristic is on this model.
Whenever reference is made to a position on the
machine "front", "back", "left" or "right" hand side,
this refers to the operator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for
use are numbered 1, 2, 3, etc.
The components indicated in the figures are
identified with letters A, B, C, and so on.
Reference to component C in figure 2 is indicated with
the wording: "See fig. 2.C" or simply "(Fig. 2.C)".
The figures are given as a guide only. The actual pieces
can differ from those illustrated in this document.
1.2.2 Titles
The manual is divided into chapters and
paragraphs. The title of paragraph "2.1 Training"
is a subtitle of "2 Safety regulations".
References to titles or paragraphs are marked
with the abbreviation chap. or par. and the relevant
number. Example: "chap. 2" or "par. 2.1"
2. SAFETY REGULATIONS
2.1 TRAINING
Become acquainted with the controls and the
proper use of the machine. Learn how to stop the motor
quickly. Failure to follow the warnings and instructions
may result in fire and/or serious injury.
EN - 1
these give details or