Style selections 9006BNMV Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. Fasten mounting brackets (BB) to shelf (A) and
towel bar (B) with hex-head screws (AA).
NOTE: Drain holes located on towel bar (B)
should be on the bottom.
Hardware Used
AA
Hex-Head Screw
BB
Mounting Bracket
2. Hold the unit level at the desired position on
the wall.
Mark the locations of the screw holes on the
wall, then set aside assembly. If you are not
installing the product to studs, hammer wall
anchors (CC) into the wall at marked locations.
NOTE: Wall anchors (CC) should be oriented
with the flat side horizontal.
For stud installations,
marked locations.
Place assembly back against wall and insert
mounting screws (DD) into wall anchors (CC)
or into drilled holes.
Hardware Used
CC
Wall Anchor
DD
Mounting Screw
IS9007-I2
drill 5/64 in. pilot holes at
1
AA
x 4
x 2
2
x 4
x 4
4
A
B
BB
CC
BB
DD
Lowes.com