Optional Accessories; Cleaning And Disposal; Warranty And Customer Care; Technical Specifications - OKBABY Body Guard Manual Del Usuario

Chapter 8/9 Child's bicycle seat OKBABY BODY GUARD
8

Optional accessories

Fastening block n. 37425000
The support arm is not connected to
the fastening block.
Tube sleeve diameter from 28 to 40 mm.
Support arm
n. 37430000 n. 37430200
standard bicycle Bicycle frames
frame inclined to the
rear
9

Cleaning and disposal

Clean the belts, the seat and the padding with warm water and a neutral
detergent or cleanser for delicate fabrics. Never use solvents or corrosive or
abrasive cleansers to avoid scratching the seat.
Leave the padding to dry in the open air. Do not iron!
The child seat and all its accessories must be disposed of and recycled at the
various ecological platforms or depots. Find out where your nearest ecologi-
cal depot is, the specialized staff will recycle all the parts avoiding all pos-
sible pollution.
Never throw the child seat into the urban waste bins!
Instructions for use and assembly
Page 72
n. 37430100 n. 37430700
Bicycle frames Small bicycle
inclined to the frames for
front women's bicycles
LIB093R01EU Edition: 03-2010
Chapter 10/12 Child's bicycle seat OKBABY BODY GUARD
10

Warranty and customer care

In all European Union countries OKBaby is responsible for all and only the
manufacturer's warranty obligations legally required by the relative European
regulations, and in particular Directive n. 99/44/CE and the corresponding
national implementation laws (in Italy: 1519-bis et seq. of the Italian Civil
Code) that foresee a 2-year warranty period.
In order for the above warranty to be applicable, please pay attention to
all the above indicated instructions and in particular those regarding the
product characteristics and performance; the mounting and/or installation
instructions and any indications regarding work to be performed by specia-
lized personnel; the instructions regarding normal use of the product; any
special warnings regarding safety and precautions to be taken when using
the product.
In particular, the warranty is not applicable for damages caused by care-
lessness, use or installation which does not comply with the instructions
provided, tampering, damage caused accidentally or due to negligence by
the purchaser. The warranty does not cover parts that are subject to normal
wear and tear, and parts which have no manufacturing defects.
Unless expressly foreseen by the law in force, all warranty claims shall be
made to the retailer from whom you purchased your product, and not direct-
ly to the manufacturer. Please make sure you keep your purchase receipt or
invoice.
Repairs can only be performed by authorized and specialized personnel.
11

Technical specifications

Product OKBABY BODY GUARD Child bicycle seat
Dimensions 73x43x57 cm (HxLxP)
Weight 4 kg
12

Compliance and manufacturer information

The marking complies to the following European Directives : EN 14344
The Declaration of Compliance is filed with the manufacturer.
Manufacturer:
OKBABY SRL
Via Del Lavoro 26
24060 Telgate BG Italy
www.okbaby.it
Instructions for use and assembly
Page 73
LIB093R01EU Edition: 03-2010