EN
20
CLEANING AND CARE
Note: Ensure that the fan is switched off from the supply mains before
removing the air filter screen.
1. Clean the air filter screen
•
Cut off the power supply, pull the handle of air filter screen, remove it from
appliance.
•
Clean the air filter screen with neutral detergent and banister brush, then
clean it with clear water.
•
Finally, reinstall to the appliance.
2. Clean the wetted pad
•
Cut off the power supply, take down the air filter screen, then draw the
wetted pad from support.
•
Clean the wetted pad with neutral detergent and banister brush, then
clean it with clear water.
•
Finally, reinstall to the appliance.
Attention: the wetted pad must be installed horizontally, in order to
avoid leaking.
3. Clean the water tank
•
Cut off the power supply, open the door, take out the water tank, clean it
with neutral detergent, and wash it with clear water.
•
Then reinstall to the appliance.