WEG ABW06D Manual De Instrucciones página 25

open Circuit Breaker
5. Maintaining the OFF button
6. Press the position
pressed, insert the extraction
lock.
rod in the hole located in the
lower part of the circuit breaker
7. Turn the extraction rod a few
times in a clockwise direction, until
the circuit breaker reaches the
TEST position.
9. Press the position lock.
8. At this moment the lock
Turn the extraction rod a few
comes out (LOCK).
times in a
clockwise direction, until the
circuit breaker
reaches the
CONNECTED position.
CAutIon!
Never turn the extraction rod with the
lock in the position LOCK.
If it is difficult to press the lock
in, make slight movements with the
extraction rod, in both a clockwise and
counterclockwise direction.
10. At this moment the lock
comes out again (LOCK).
ABW | 25
English