Attaching The Work Bowl Cover - KitchenAid 5KFP1335 Manual De Instrucciones

SETTING UP YOUR FOOD PROCESSOR

Attaching the work bowl cover

NOTE: Your Food Processor will not operate unless the work bowl and work bowl cover are
properly locked on the base, and the large pusher is inserted to the maximum fill line on the
feed tube (approximately halfway down).
1
Place the work bowl cover on the
work bowl with the feed tube just to
the left of the work bowl handle. Grasp
the feed tube and turn the cover to the
right until it locks into place.
NOTE: Be sure to install the desired
accessory before attaching the work
bowl cover.
16
2
Fit the food pusher into the 3-in-1
feed tube. See "Using the 3-in-1
Feed Tube" for details on working with
different sized foods.
Food
pusher