Use And Operation - oneConcept 10020781 Manual De Instrucciones

• Extreme caution must be used when moving an appliance containing hot water.
• The appliance is not a toy. Do not let the children play it.
• The use of attachments that are not recommended by the appliance manufacturer may
result in fire, electric shock or personal injury.
• While boiling water, avoid to contact with steam from the spout when water is boiling or
just after it has switched off. Do not be anxious to uncover the lid.
• Unplug from outlet when not in use and before cleaning; Allow it to cool before putting on
or taking off parts and before cleaning the appliance.
• Always ensure the lid is closed and do not lift it while the water is boiling. Scalding may
occur if the lid is removed during the brewing cycles.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
• Do not use the appliance for other than intended use.
• If the kettle is overfilled, boiling water may be ejected.
• Do not use the kettle outdoors.
• This appliance is not intended for use by persons (including children) with reduced phy-
sical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliances by a person
responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance is intended to be used in household and similar applications such as: staff
kitchen areas in shops, offices and other working environments; farm houses; by clients
in hotels, motels and other residential type environments; bed and breakfast type envi-
ronments.
Before first Use
If you are using the kettle for the first time, it is recommended that you clean your kettle
before use by boiling a full kettle of water twice and then discarding the water.

Use and Operation

1. To fill water into the kettle, remove it from the power base and open the lid by pressing
the lid open button , fill with the desired amount of water to the kettle. Always fill the
kettle between the minimum (0.5L) and maximum (1.7L) marks. Too little water will re-
sult in the kettle switching off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout
when boiling. Ensure that the lid is firmly in place before connecting the power cord to
the outlet.
2. Position the kettle on the power base.
Use and Operation
7